Production

Environmental responsibility
Always adhere to the principle that enterprises are an integral part of society, and fulfill environmental protection responsibilities while realizing enterprise values
Low carbon green raw materials
1100&3003 alloy of our company is completely melted into billet rolls by recycled aluminum. Compared with the production of primary metals, the energy required for 1 ton of recycled aluminum is only about 5% of the original aluminum, saving 13350 kWh, 22 m³ and 20 tons of solid waste. At the same time, 0.8 tons of carbon dioxide can be reduced, and the pollutant emissions are only 10% of the pollutants generated in the whole process of primary aluminum production.
The use of recycled aluminum accounts for nearly 58% of the company's products.

Energy consumption (kg coal/t) | Power consumption (kWh/t) | Water consumption (m3/t) | Reduction of solid waste discharge (t) | Carbon emission reduction (t) | ||||||
Energy consumption of primary aluminum | Energy consumption of recycled aluminum | Energy saving | Power consumption of primary aluminum | Power consumption of recycled aluminum | Energy saving | Primary aluminum water consumption | Recycled aluminum water consumption | Energy saving | ||
3916 | 150 | 3443 | 14000 | 650 | 13350 | 22.7 | 0.5 | 22.2 | 20 | 08 |

Scrap aluminum block

Scrap aluminum block

Waste aluminum smelting

1. 3-series cast rolled aluminum coil
Green production process
The paint shall be stored in a standard way, away from light, ventilation and fire.
The paint bucket and remaining paint shall be disposed in strict accordance with the level of hazardous waste chemicals.

The tail gas of coating production curing furnace is discharged after incineration at 750 ℃, and the heat of incinerator is recycled to reduce energy consumption.
Coating waste gas incinerator

Cold rolling oil mist purification treatment device
Specific purification process of cold rolling oil mist purifier:
Oil mist collection - pre filtration → ionization → collection → separation → final filtration → collection and reuse of filtered oil → clean air emission

The wooden pallets of packaging materials are recycled, and all incoming wooden pallets are transformed and utilized, saving a lot of wood and reducing carbon emissions.


Product green
The coating products meet the requirements of FDA regulations, and 3003 and 5052 alloy aluminum plates meet the European ROHS directive
The double-sided coating products meet the FDA testing standards of the US Food and Drug Administration

3003 and 5052 comply with European RoHS directive 3003SGS test report

5052SGS test report
